TAC Tech => Interior => Topic started by: TA301 on October 07, 2026, 12:25:02 PM
-
Absolutely disgusting quality felt and application. Compare to the ones pictured, there is no comparison.
http://
https://www.ebay.com/itm/130568636564?_skw=81+trans+am+door+panel&epid=1317776463&itmmeta=01M4BQ6ZMH5BBED5EXGKXP6C25&hash=item1e667f4894:g:Hv0AAOSwrOtZzli1&itmprp=enc%3AAQALAAAA8GfYFPkwiKCW4ZNSs2u11xALRbJZAKum%2BnmOdut5m0oFP2TgCPBWW7jHOcvkMgIk9NYDG6mY3Sp%2Fykh3koOhlYW%2BooxO4C7r9D4NWpMdPuJbtJyncig7QI9h90y8XYJPKYskfyzSuGistO%2B9lYKnqsMjhuBRS4fNa84oKjyF2OVNuhvXGPScgxTBMgUU3h7FyBky19DvjsrjR3obBK5fImVaMVOmg%2BAjv5BU0ouH0OFPvlCTWm3ZqE2RJ8SlJ2jqrwF%2BeuWqglYwm6nGn2Euvw2LZDMO6U7axjATxkSO55ql2pui4DFLqI3Wih%2FTIvzITQ%3D%3D%7Ctkp%3ABk9SR4D7m_eiaA
-
Original pic is more of a flocking than felt, regardless what they sell doesnt match advertising, even if was just as good.
-
Ya, I found that out when I was building my car. I had to go through my bins and all the doors I had to find enough good originals to use for my car.
-
There's many instances online where a NOS GM part is shown for a reproduction being sold. Many would never know, just the stock photo used. Found it several times comparing them for the NOS vs Repro thread. So often the details simply don't match what is supplied. The body door jamb vent is a common example. There's a few unique moulding details that only feature on the GM, but more obvious is the recessed screw hole that nearly every pic features but is yet to be seen in a repro.