TAC Central => Lobby => Topic started by: rkellerjr on December 02, 2021, 07:52:24 PM
-
I need to remove the parking brake assembly under the dash. I get what needs to happen but how do I get slack in the emergency brake cable to remove from the assembly?
-
Mark and undo the adjusting nuts on the primary cable, that will give you enough slack to pull the ferrule clear of the parking brake clevis.
-
Hey Rich, I think you've started something new. Sort-a like..."Today I..." that's what I thought this thread was.
If I were to continue, I would ask, "How do I"....repair my newly acquired round port exhaust manifold cracks?
(Will "Muggy Weld" work?)
Of course I would only ask this, after you've gotten your question answered. :smile:
-
I'm cool with others asking this question. I've got my answer
-
Hey Rich, I think you've started something new. Sort-a like..."Today I..." that's what I thought this thread was.
If I were to continue, I would ask, "How do I"....repair my newly acquired round port exhaust manifold cracks?
(Will "Muggy Weld" work?)
Of course I would only ask this, after you've gotten your question answered. :smile:
I've never tried but I was told welds will not hold.
-
Punch in "Muggy welding" exhaust manifolds, and see what you think. I welded my cast iron coal stove with it, and it stuck. But the area of the stove I used it on, wasn't structural. Only cosmetic. Not loaded.