Author Topic: Wiring harness swap  (Read 431 times)

tinpusher

  • Active Forum Member
  • *
  • Posts: 400
Wiring harness swap
« on: January 07, 2023, 09:59:20 AM »
My friend has a 1976 TA that had a engine fire and destroyed all the wiring from behind the dash forward.
I’m going to help him with the repair and found a 1977 TA dash harness in excellent condition and needed some advice.  Would a 1977 Dash Harness work with a 1976 front headlight wire harness without modification?… going from 2 / 4 lights..
As far as I can tell, the headlight switch should be the same. He has limited funds and the $$$ of a new harness is not a option. Thanks in advance.

firebirdparts

  • Jedi Council
  • Oracle Forum Member
  • *
  • Posts: 19501
Re: Wiring harness swap
« Reply #1 on: January 07, 2023, 11:42:15 AM »
Yes, it'll be fine.  The outboard lights act like the lights on a 76.

The A/C on a 76 is vey different, but that's a separate harness.  The blower part of it will still work, I guess.

I did not look to see if any bulkhead pins moved around between 76 and 77.  I would bet not.  I don't personally have a 76 wiring diagram.  So I would suggest you just look at the bulkhead and see if it looks to you like the wires are in the same places and/or if you see an extra one someplace.
I want to be like Paul Kenny when I grow up
Joe Bays
1977 Y82 4-speed (red interior)
1978 Skybird 350
1978 Redbird 305
1979 Redbird 301 4-speed
1992 Lincoln Mark VII LSC/SE (red)
1970 Datsun Pickup
1953 Chevy pickup (converted 4x4)
1988 T-bird Turbo Coupe

rkellerjr

  • Oracle Forum Member
  • *
  • Posts: 6721
  • When you turn your car on does it return the favor
Re: Wiring harness swap
« Reply #2 on: January 07, 2023, 11:43:59 AM »
You might want to check Franks Pontiac Parts. You might be able to get used harnesses for the '76 in his budget.

https://www.frankspontiacparts.com/usedparts3/fullsizepontiacparts2.htm

b_hill_86

  • Oracle Forum Member
  • *
  • Posts: 1982
Re: Wiring harness swap
« Reply #3 on: January 07, 2023, 10:28:19 PM »
I don’t have a 76 manual but I may have a 76 wiring diagram if it would help
-Brian-

1977 Trans Am 400 4 speed

tinpusher

  • Active Forum Member
  • *
  • Posts: 400
Re: Wiring harness swap
« Reply #4 on: January 08, 2023, 10:05:17 AM »
I’m taking  whatever everyone is giving. I have a spare AC box and heater core assembly from a 77 TA that I’m giving him along with spare gauges and a dash that needs a little work.
Thanks for everyone’s suggestions, I’m a plug and play electrical guy…….
His fire was at the rear of the engine, so everything attached to the firewall area is toast, inside/outside. I haven’t looked at the wiring on the steering column but I’m praying that is salvageable, if not,  the only thing I’m thinking that would be different is the high beam switch? Does anyone know what year that changed?

Re: Wiring harness swap
« Reply #4 on: January 08, 2023, 10:05:17 AM »

b_hill_86

  • Oracle Forum Member
  • *
  • Posts: 1982
Re: Wiring harness swap
« Reply #5 on: January 08, 2023, 12:22:26 PM »
High beam moved from the floor to the column in 79. PM me your email address
-Brian-

1977 Trans Am 400 4 speed

tinpusher

  • Active Forum Member
  • *
  • Posts: 400
Re: Wiring harness swap
« Reply #6 on: January 08, 2023, 12:29:18 PM »
Pm sent

b_hill_86

  • Oracle Forum Member
  • *
  • Posts: 1982
Re: Wiring harness swap
« Reply #7 on: January 08, 2023, 02:20:48 PM »
Replied
-Brian-

1977 Trans Am 400 4 speed

Re: Wiring harness swap
« Reply #7 on: January 08, 2023, 02:20:48 PM »
You can help support TAC!