TAC Tech => Audio => Topic started by: N PRGRES on July 12, 2023, 11:40:04 AM
-
Anyone have a power antenna and can measure it's location on the left front fender for me? Thanks
-
Yup! Will try to get it posted tomorrow.
-
Thank you!!! :P :P :P
-
For sake of comparison, or for Kerry to check, this is from the 1980 Assembly Manual.
(https://live.staticflickr.com/65535/53042985515_50b485c398_h.jpg) (https://flic.kr/p/2oPeaB2)Firebird 1980 fender electric aerial diagram (https://flic.kr/p/2oPeaB2) by Ben (https://www.flickr.com/photos/196419001@N03/), on Flickr
(https://live.staticflickr.com/65535/53042996415_1590236046_z.jpg) (https://flic.kr/p/2oPedQX)Firebird 1980 fender electric aerial diagrams (3) (https://flic.kr/p/2oPedQX) by Ben (https://www.flickr.com/photos/196419001@N03/), on Flickr
(https://live.staticflickr.com/65535/53042789784_b9d7ed1458_b.jpg) (https://flic.kr/p/2oPdaqm)Firebird 1980 fender electric aerial diagrams (2) (https://flic.kr/p/2oPdaqm) by Ben (https://www.flickr.com/photos/196419001@N03/), on Flickr
-
Either I can't read or thats about as clear as mud lol
-
both
-
(https://live.staticflickr.com/65535/53042840001_5f857bd1eb_c.jpg) (https://flic.kr/p/2oPdqma)2023-07-13_08-12-18 (https://flic.kr/p/2oPdqma) by Kerry Grubb (https://www.flickr.com/photos/156399515@N07/), on Flickr
(https://live.staticflickr.com/65535/53042253172_a9f4b0e8e1_c.jpg) (https://flic.kr/p/2oPapUq)2023-07-13_08-12-25 (https://flic.kr/p/2oPapUq) by Kerry Grubb (https://www.flickr.com/photos/156399515@N07/), on Flickr
(https://live.staticflickr.com/65535/53043015814_1c6d9a8009_c.jpg) (https://flic.kr/p/2oPejBq)2023-07-13_08-12-02 (https://flic.kr/p/2oPejBq) by Kerry Grubb (https://www.flickr.com/photos/156399515@N07/), on Flickr
(https://live.staticflickr.com/65535/53043327253_dabf6807da_c.jpg) (https://flic.kr/p/2oPfVc4)2023-07-13_08-12-36 (https://flic.kr/p/2oPfVc4) by Kerry Grubb (https://www.flickr.com/photos/156399515@N07/), on Flickr
Centre of hole is 19-5/8" from extreme point of fender, and 1-1/4" from inside edge of fender. I forgot to get the diameter of the hole but Bens shop manual has that I believe.
This is the driver side fender.
-
Thank you very much!