TAC Tech => Interior => Topic started by: Wallington on December 02, 2022, 09:05:54 PM
-
Quick question for anyone who hasn't had their car pulled apart at some point, how did the factory secure the demister Y-duct vents under the dash. Here's mine from 15 years ago, I added the stud retainers to stop them rattling. There's assembly diagrams that show more of a blurry clip and a blurry part number that doesn't come up as recognised.
(https://live.staticflickr.com/65535/52538368532_3620fb5fed_b.jpg) (https://flic.kr/p/2o3CSyd)Firebird dash Aircon demister crack vent (https://flic.kr/p/2o3CSyd) by Ben (https://www.flickr.com/photos/196419001@N03/), on Flickr
(https://live.staticflickr.com/65535/52539804500_c4d50bec30_b.jpg) (https://flic.kr/p/2o3Leqh)20221203_214804 (https://flic.kr/p/2o3Leqh) by Ben (https://www.flickr.com/photos/196419001@N03/), on Flickr
-
Hopefully someone has something. Both of my cars were apart.
-
If I remember correctly there was a piece of felt like material wedged in between.
-
Interesting, thanks. Anyone recall how held in place, or has car apart to look in that area?
-
The stud is kept in place with a stud retainer........The stud then goes through the hole from the back of the frame.....and a type of retainer is pushed onto the stud to keep the vent in place.
-
There wasn't any type of felt on mine when I took it apart.
-
Aaah pretty much what the diagram looks like then! Excellent pics, much appreciated.
-
Since I don't have anything like the original shaft retainer u-clip, I remembered that I had several spare door panel bird emblem retainers, same as rear speaker insulation box retainers. These also fit perfectly and can be released for removal easily if needed, unlike what I currently have to remove in the future.
(https://live.staticflickr.com/65535/52582768206_93903e600e_b.jpg) (https://flic.kr/p/2o7yr2Q)Firebird windscreen demister duct door emblem retainer test (https://flic.kr/p/2o7yr2Q) by Ben (https://www.flickr.com/photos/196419001@N03/), on Flickr
-
Excellent ! Thanks Ben
-
Haha I wasn't really going for anything except conversation there, and finding an alternative to an unusual part.