TAC Tech > Tires, Brakes & Suspension
Turn signal cam
jbanna:
Ok, after centering the new gear, the steering wheel, and getting a shop to align the wheels, my turn signal cam is off a bit - when I turn right it clicks off too early, but when I turn left it clicks off way too late...any ideas? Can I pull the hub and adjust it?
jbanna:
...and it's the stock rally wheel with the six screw attachments...
b_hill_86:
If nobody else responds I’ll try to take apart the spare column I have. It’s been a few years since I pulled one apart and I can’t remember how the cancelling cam is oriented or if it can be repositioned.
jbanna:
No worries, I can pull mine - I was just being lazy to see if anyone could remember replacing their cam...I'll probably just pull the hub and be 100% sure the cam isn't damaged; it is about 20 years old...
roadking77:
It may be the cam is bad? I have taken apart a few columns and do not remember there being any adjustment. It seems to me everything locks into place. There may be a millimeter side to side but I dont think there is any alignment or adjustment built into them for fine tuning.
Navigation
[0] Message Index
[#] Next page
Go to full version