TAC Tech => Number Crunching => Topic started by: Wallington on May 07, 2023, 03:06:00 AM
-
.
-
Those are rather large, I suppose you could get a couple of the largest 3 ring binders and break them up into part 1, 2 etc. I think they were originally on a rack system.
-
Not sure if they are available anymore but that top one was very common in the hardware store and supplier fields. I threw away hundreds of them when I used to work a larger hardware store chain.
This is as close as I could find.
https://www.amazon.com/DURABLE-Catalog-Section-Capacity-595410/dp/B01N7CGZJS/ref=mp_s_a_1_4?crid=16U37SMD765P7&keywords=thick+catalog+binder+metal&qid=1683541692&sprefix=thick+catalog+binder+metal%2Caps%2C112&sr=8-4
-
When I got my parts books from the local dealer parts dept., they used bolts to hold it together. :-P It's been that way for 30 years and is holding up well.
-
When I got my parts books from the local dealer parts dept., they used bolts to hold it together. :-P It's been that way for 30 years and is holding up well.
It does work well. Somebody made available a selection of barrel nuts just for that.
-
Use nylon bolts and nuts - won't scratch.
-
I'd day they look stock. Nice job with the clamps!
-
Love it!