Print Page - Part Identification

TAC Tech => Exterior => Topic started by: wheels78ta on September 27, 2023, 04:59:24 PM

Title: Part Identification
Post by: wheels78ta on September 27, 2023, 04:59:24 PM: I found these in a box of front end parts. Not sure where they go.

Evidently, I had to cut one of these off but it's been so many years I can't remember where it came from.

Any Ideas?
.
Title: Re: Part Identification
Post by: tinpusher on September 27, 2023, 05:39:22 PM: I’ll give it a shot….. since I didn’t know the year firebird, is it possibly the bolts/spacers that holds on the front spoiler to the bottom of the front bumper on a 1970-73 Endura front bumper?
Title: Re: Part Identification
Post by: Wallington on September 27, 2023, 07:37:44 PM: 76-78 front license plate mounts. Good pics.

#525657 are the long bolts. 1/4" x 4.75".
#500519 are the angled rubber spacers.

Although, officially they are "license plate brakcet mounts"

(https://live.staticflickr.com/65535/53218856443_5a0ec2ddd8_z.jpg) (https://flic.kr/p/2p5LxUp)Firebird 76_78 license plate mounting front (https://flic.kr/p/2p5LxUp) by Ben (https://www.flickr.com/photos/196419001@N03/), on Flickr
Title: Re: Part Identification
Post by: wheels78ta on September 27, 2023, 08:26:35 PM: Quote from: tinpusher on September 27, 2023, 05:39:22 PM
I’ll give it a shot….. since I didn’t know the year firebird, is it possibly the bolts/spacers that holds on the front spoiler to the bottom of the front bumper on a 1970-73 Endura front bumper?

Sorry about that.

1978 Trans Am...Y88.
Title: Re: Part Identification
Post by: wheels78ta on September 27, 2023, 08:30:56 PM: Thanks Ben.......That explains it.

The front license plate holder was also in that box of front end parts. It's been a long time ago since I've seen some of these parts.
Title: Re: Part Identification
Post by: rkellerjr on September 28, 2023, 07:35:20 AM: Ben strikes again on part questions!
Title: Re: Part Identification
Post by: FormTA on September 28, 2023, 11:40:24 AM: He has such obscure info that is needed when it's needed!
Title: Re: Part Identification
Post by: 5th T/A on September 28, 2023, 08:58:34 PM: X2 to what Rich and Luke said.
Title: Re: Part Identification
Post by: roadking77 on October 02, 2023, 05:56:03 AM: Great info. I think mine is just screwed to the bumper. The way I got it. I knew it wasnt right but it worked.