Generation Specific => Second Generation 1970-1981 => Topic started by: Wallington on February 23, 2024, 03:07:34 AM
-
Anyone ever seen these before or similar used on these cars? Claims they came off the radiator support to fender on a 79 TA. I can't read the part number that had changed by the 1980 Assembly manual and none of my guesses translate to known parts.
https://www.ebay.com/itm/326014143383?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=JC4NbRSoTTm&sssrc=2047675&ssuid=Otl3lLdJQZG&widget_ver=artemis&media=COPY
-
I have them on my 1981 T/A
-
Thanks, that must have been the part number that didn't come up. Even back then GM were trying to prevent nose swaps! I checked my original, low-mileage 1979 engine bay pics and they are all regular type where visible. My limited 80-81 enginebay pics don't show this area, most pics crop it out.
-
Actually, when I was reassembling my 79 I had those screws labeled as a front end screw
I posted a picture if them here asking where they went and someone posted a picture of there location. I can't remember exactly where they go, but I can open my hood and find out if you need me to.
-
Yes, I remembered a post once but not the specifics. I probably even saved pics, just didn't type in the right keywords.
-
Def. not on my 77, and the braces were missing from my 79 so I have no idea what was on there! The only 12pt bolts I was aware of were on the seat belts.
-
These aren't the brace bars but the 2 on each end of the radiator support when fender wraps over. But why?
-
Mine were on the front fender to radiator support (1979) didn’t look like they had been moved .