1
Lobby / Re: Today I... "Redux Edition"
« Last post by roadking77 on Today at 01:21:10 PM »Glad to hear from you. Sounds like things have been taking a positive course of action. I bet youre glad to be done with school at this point.
For all Firebird - Trans Am Enthusiasts
News:
Recent Posts
2
Lobby / Re: Spotted!!! Any year of bird
« Last post by roadking77 on Today at 01:17:51 PM »
20240507_122343 by Kerry Grubb, on FlickrSpotted this GTA in the wild today. One of my favorite Trans Ams. White third gen is awesome, GTA even better
3
Lobby / Re: Current picture of your project or finished car.
« Last post by roadking77 on Today at 01:14:59 PM »Same to you Charlie, and what Mike said.
4
Pro-Touring F-body / Re: Made a Tennessee Run Sunday
« Last post by N PRGRES on Today at 12:08:07 PM »Car looks great Dave!Thank you
Mike, I will be in touch.
5
Lobby / Re: Current picture of your project or finished car.
« Last post by kentucky yeti on Today at 11:38:54 AM »Hi! Good to see you back here!
6
Tires, Brakes & Suspension / Re: Brake Help
« Last post by tinpusher on Today at 11:37:02 AM »Pretty close to stock if I remember right. Swapped out those brake lines about 10 years ago and the stock ones also had the excessive bends prior to the caliper for the side to side movement
7
Tires, Brakes & Suspension / Re: Brake Help
« Last post by tinpusher on Today at 11:33:07 AM »Passenger side:
8
Tires, Brakes & Suspension / Re: Brake Help
« Last post by tinpusher on Today at 11:29:42 AM »Drivers side:
9
Mechanical / Re: Boosting a 301 (for fun)
« Last post by ryeguy2006a on Today at 10:58:11 AM »I love this!! I'm very jealous because I really want to add boost to my 55, but not in the cards right now. As for the boost through a Holley TBI I can't speak, but the software side it's 100% possible. Not only that, it's quite easy. I think that the stock Sniper fuel injectors are good for around 450 HP on an N/A vehicle, so the boosted would likely be less. More like 375-400, but is likely less than your target so you should be good there. You'll need to figure out what MAP sensor is a direct fit in the TBI and can read up to 2 Bar. You'll also want a beefy fuel pump, but you likely won't need anything more than a 255 lph since you are not looking for lots of boost. On the tuning side, you need to re-map the VE and Spark tables to account for the added boost which reads in kPA. 100 kPA is atmosphere, and 200 kPA is 14.7 psi, so you'd want to update the VE and spark tables to read from zero to about 150 kPA. You'll also want to do some reasearch on what AFR you want to run. I think generally you'd want to be around 12.5 at 100 kPA and bring it down somewhere in the 11's at full boost. Depending on how the motor reacts though, you could lean that out. Selecting the AFR is a hugely critical step in these "self-tuning" ECU's. While it does have a learn table for your fueling, you need to populate the AFR, timing and other variables. I'd probably just pick a 5psi wastegate spring and let the computer tune your fuel tables after you set AFR. Sounds like a really fun project, and I can't wait to hear more about it. Feel free to text me if you have any questions.
10
Lobby / Re: Today I... "Redux Edition"
« Last post by Nexus on Today at 09:51:09 AM »Today I stopped by to say hello, so Hello everyone!
School is now done, as I managed to graduate from the Electrical Technician program at the local college, and just as that happened, my wife requested that I finish the kitchen cupboard project I started before school!
She's been patient, so that's what I'm currently doing. After that, my hope is that I am able to plan at least once a week to getting the firebird back together and driving under her own power. Hopefully before the second coming of Christ!!
I also intend to tinker away at my bike project again once a week but that is not a priority although I wouldn't mind seeing if I can get to run this summer.
What else is going on here.............My dojo is doing pretty good! I have enough students to pay the bills but not enough to get rich but I'm ok with that!!
This year I want to try and rethink and scale down some of the projects, and learn that, although I can do everything myself, I don't necessarily have to do every thing myself!!
Cheers
School is now done, as I managed to graduate from the Electrical Technician program at the local college, and just as that happened, my wife requested that I finish the kitchen cupboard project I started before school!
She's been patient, so that's what I'm currently doing. After that, my hope is that I am able to plan at least once a week to getting the firebird back together and driving under her own power. Hopefully before the second coming of Christ!!
I also intend to tinker away at my bike project again once a week but that is not a priority although I wouldn't mind seeing if I can get to run this summer.
What else is going on here.............My dojo is doing pretty good! I have enough students to pay the bills but not enough to get rich but I'm ok with that!!
This year I want to try and rethink and scale down some of the projects, and learn that, although I can do everything myself, I don't necessarily have to do every thing myself!!
Cheers
