Recent Posts

1

Mechanical / Re: Toasted Clutch

« Last post by Zach on Today at 02:34:21 PM »

Finally got it back on the road, clutch feels great and all my noises are gone. Lighter than the previous but that could be from a lot of things. And…… I don’t have second gear… sometimes. Seems I can’t shift into second when moving and it doesn’t feel solid shifting into it at a stand still. Think my ball detents are out of wack, for some reason the fork doesn’t want to move far enough. I didnt pull the gears apart so it should all be fine. Gonna drain the oil and rip the side cover off and hopefully fix this.

2

Lobby / Re: Longtime member passed away

« Last post by ryeguy2006a on Today at 10:59:51 AM »

RIP... I remember his cars and posts.

3

Lobby / Re: Longtime member passed away

« Last post by Maryland Bandit on Today at 07:32:25 AM »

George took my car to his house after the 2009 Nationals. Kept it all winter, working his magic on it. Mission creep kicked in. The motor, trans, starter all come out and were rebuilt while he had it. Got it back in the spring of 2010.
It took 2nd place in S/E 2 class in 2010. Too many other George and JP stories to list here but the man will surely be missed. He was a friend to anyone that met him.   

4

Electrical / Re: Steps to replace center dash speaker

« Last post by Wallington on May 22, 2024, 08:56:00 PM »

1976 Assembly has a diagram that shows an 1895 globe in the rally gauge pack.
1980 Assembly doesn't appear to have this diagram or list globe.
1976-81 Parts shows F-body dash with 1895 globe listed.

GM #9417863

https://i.ebayimg.com/images/g/wFoAAOSw2MVekLxP/s-l1200.webp

5

Electrical / Re: Steps to replace center dash speaker

« Last post by stros on May 22, 2024, 08:09:08 PM »

You’ve got a good eye- this is a non AC Trans Am that has aftermarket AC installed in it.  The brand is “Old Air” and leverages the non AC controls to run it.

Ah gotcha. I figured as much but wasn’t sure. Does it just operate off of the vent setting? Sounds like I was wrong about the bulb. Sorry to steer you in the wrong direction

No worries on the bulb - that’s by far the easiest item to deal with on this project.  Yes - the AC runs off of the vent controls.  It’s a pretty cool setup that was much cheaper than Vintage Air at the time.

Good news!  Got the speaker out the glove box side, after lowering the center vents.  Not sure if I could’ve done this entirely thru the glovebox side instead but there’s no way that speaker would fit thru the gauge cluster opening.  The bracket fits my replacement speakers too but the new bracket looks like it may be easier to install.  It arrives tomorrow - will decide what option to take then.

6

Electrical / Re: Steps to replace center dash speaker

« Last post by b_hill_86 on May 22, 2024, 09:28:27 AM »

I want to say it’s the same as the other. 192? Your center vents look different than mine. I have the piece with the vent deflectors that change the direction of the air and nothing behind them but the plastic duct. As I mentioned, I think I took mine out through the glovebox area. My replacement speaker didn’t allow for the factory placement of the center vent ducts so I’m positive I removed it in the process.

I’m curious. You have center vents but what appears to be a non-AC HVAC control

You’ve got a good eye- this is a non AC Trans Am that has aftermarket AC installed in it.  The brand is “Old Air” and leverages the non AC controls to run it.

Ah gotcha. I figured as much but wasn’t sure. Does it just operate off of the vent setting? Sounds like I was wrong about the bulb. Sorry to steer you in the wrong direction

7

Electrical / Re: Steps to replace center dash speaker

« Last post by Wallington on May 22, 2024, 12:43:04 AM »

It said 1895 on the chart I looked up, but wasn't terribly specific for some models.

8

Electrical / Re: Steps to replace center dash speaker

« Last post by stros on May 21, 2024, 10:14:53 PM »

All good, I was actually referring to this speaker pic rather than yours, in the 2nd gen section.

Haven't you got access to rear of gauges you just took out to check globe?!  I don't have one nearby to check.

https://cdn11.bigcommerce.com/s-jooapdgscx/images/stencil/1280x1280/products/1395/7528/1st-front-speaker-bracket-installed__55530.1697568153.jpg?c=2?imbypass=on

It has some generic LED bulb installed in it with no numbers on it.
 From what I can tell it’s an 1895 or 89 bulb.

9

Electrical / Re: Steps to replace center dash speaker

« Last post by stros on May 21, 2024, 10:13:01 PM »

I want to say it’s the same as the other. 192? Your center vents look different than mine. I have the piece with the vent deflectors that change the direction of the air and nothing behind them but the plastic duct. As I mentioned, I think I took mine out through the glovebox area. My replacement speaker didn’t allow for the factory placement of the center vent ducts so I’m positive I removed it in the process.

I’m curious. You have center vents but what appears to be a non-AC HVAC control

You’ve got a good eye- this is a non AC Trans Am that has aftermarket AC installed in it.  The brand is “Old Air” and leverages the non AC controls to run it. 

10

Electrical / Re: Steps to replace center dash speaker

« Last post by b_hill_86 on May 21, 2024, 10:04:53 PM »

I want to say it’s the same as the other. 192? Your center vents look different than mine. I have the piece with the vent deflectors that change the direction of the air and nothing behind them but the plastic duct. As I mentioned, I think I took mine out through the glovebox area. My replacement speaker didn’t allow for the factory placement of the center vent ducts so I’m positive I removed it in the process.

I’m curious. You have center vents but what appears to be a non-AC HVAC control