TAC Tech => Tires, Brakes & Suspension => Topic started by: EspriTA350 on April 22, 2021, 09:31:35 AM
-
Does anyone have a diagram of the 78-81 WS6 braces that go from the front lower control arm to the frame?
-
(https://live.staticflickr.com/65535/51132617353_1025911011_b.jpg) (https://flic.kr/p/2kUq2GV)Chassis braces Firebird WS6 type (https://flic.kr/p/2kUq2GV) by Aus78Formula (https://www.flickr.com/photos/53057445@N08/), on Flickr
(https://live.staticflickr.com/65535/51132406926_bf3e828c03_z.jpg) (https://flic.kr/p/2kUoX9S)WS6 braces1 (https://flic.kr/p/2kUoX9S) by Aus78Formula (https://www.flickr.com/photos/53057445@N08/), on Flickr
-
(https://live.staticflickr.com/65535/51132617353_1025911011_b.jpg) (https://flic.kr/p/2kUq2GV)Chassis braces Firebird WS6 type (https://flic.kr/p/2kUq2GV) by Aus78Formula (https://www.flickr.com/photos/53057445@N08/), on Flickr
(https://live.staticflickr.com/65535/51132406926_bf3e828c03_z.jpg) (https://flic.kr/p/2kUoX9S)WS6 braces1 (https://flic.kr/p/2kUoX9S) by Aus78Formula (https://www.flickr.com/photos/53057445@N08/), on Flickr
Beautiful. Thank you!
-
When I transferred those braces from my bent up 78's frame to the Camaro Frame, I made a Cardboard Template that matched the old frame and drilled the holes that were missing. Everything fit perfect. Without the Springs Installed you can reach down inside the frame to put the nuts and lock washers on and get a wrench on the nuts no problem.
-
I’d have to search around but I’m 90% positive I have an extra set of these in my garage if anyone is interested. PM me if so.
-
I’d have to search around but I’m 90% positive I have an extra set of these in my garage if anyone is interested. PM me if so.
I sent you a pm